METRA. THE WORLD’S BEST KITS.™© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION APPLICATIONS1-800-221-0932metraonline.comINSTALLATION INSTRUCTIONS
1099-7612Wiring InstructionsFrom the included 7612 harness:1. Plug the black 16-way connector into the 99-7612.2. Plug the black 12-way connector in
1199-7612Wiring InstructionsSWC ProgrammingAfter all connections are made, turn ignition and the 7612 buttons will flash the number of times that corr
1299-7612SWC Button Reassignment/RemappingLet’s say you have the 99-7612 programmed to your vehicle and your radio and you want to change the button a
1399-7612SWC Button Reassignment/Remapping For instance the next command to be mapped is the Volume Down command. Let’s say you want the Mode butt
Notes
METRA. THE WORLD’S BEST KITS.™© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION 1-800-221-0932metraonline.comINSTALLATION INSTRUCTIONS FOR PART 99
Table of ContentsDash Disassembly– Nissan Murano 2003-2007 3-5 Kit Assembly– ISO DIN head unit provision with pocket 6-7– DDIN head unit provision
1. Unclip and remove the trim panel surrounding the display and including the a/c vents. (Figure A)2. Remove (2) Phillips screws exposed behind ven
4. Remove (1) Phillips screw per side of radio chassis exposed behind lower trim panel. (Figure D)5. Remove radio/climate control assembly from th
8. Remove the unified meter a/c amp from radio chassis assembly. (Figure G)9. Remove (8) Phillips screws securing the switch panel to the radio tri
6Kit Assembly 99-7612ISO DIN head unit provision with pocket(Figure B)(Figure C)1. Trim the shaded areas from the factory radio trim panel. (Figure
7ISO DIN head unit provision with pocket(Figure D)(Figure E)5. Mount the Unified Amp Meter to the radio/bracket assembly using (2) supplied 3/8” Phi
8DDIN head unit provision(Figure B)(Figure C)1. Trim the shaded areas from the factory radio trim panel. (Figure A) Do not cut the locator and scre
9DDIN head unit provision(Figure D)4. Mount the Unified Amp Meter to the radio/bracket assembly using (2) supplied 3/8” Phillips screws.(Figure D)5.
Comments to this Manuals